December 13, 2019

Syllabus

Participation

We want to maintain a reasonably flexible and laid-back approach to the classroom, but at the same time we need to maintain standards of politeness while ensuring that students can be successful. To this end there will be a participation grade which includes but may not be entirely limited to

  • Students must be seated within three (3) minutes of the bell.
  • Habitual tardiness will be addressed more aggressively than a rare event.
  • Students are expected to arrive with their materials including a calculator and a pencil.
  • Side conversations during instruction are inappropriate and discourteous.
  • Under no circumstances may a student study for a non-physics class during physics.
  • If a student completes the assigned work early, that student will generally be requested to serve as a peer tutor for other students in the class. This promotes learning for both, enhances the inclusive environment and helps the entire class to move forward.
  • Students who are advancing more rapidly may be offered more challenging work.

The random seating chart has really improved the quality of the class. Grades have improved significantly, and the class is more inclusive. We will continue to use the random seating chart.

Quality of Work & Late Work

  • Use a pencil for all graphs, sketches and computations. Erase mistakes completely and do not use cross-outs.
  • Work neatly or be prepared to be marked down and to re-do the work.
  • All numbers require units.
  • All graphs must use as much of the graph as reasonably achievable, and both titles and axis labels are required every time.
  • Always support your answer by showing work to support your reasoning.
  • Except in the case of an absence, late homework is not accepted.
  • Lab reports will be marked down 10% every calendar day that they are late.
  • Students are responsible for checking the calendar and the website.

”Hide” the Course Information and ”show” the Syllabus based upon which you prefer to view.

Course Information

show

AP® Physics 1
2014 – 2015 General Information

Dr. Robert F. Szalapski
The Harley School – Physics

§ 1. Contact Information

Web site:

We will make extensive use of my web site, www.CallMeDrRob.com. Every student must have an account on this website. My Google calendar is embedded on the “Students/Harley Physics” page, and it will be updated frequently. A wide variety of links and down-loadable resources are available here.

e-mail:

This is the fastest and most reliable form of communication. My Harley e-mail is RSzalapski@HarleySchool.org, and associated with my website I have CallMeDrRob@gmail.com.

Communication is a good thing, and more is generally better.

§ 2. Syllabus

Because this course is a College Board AP® audited course I have prepared an exceptionally detailed syllabus which will be provided separately.

§ 3. Grading

I like exploration, and to the greatest possible degree this course will be hands-on and exploratory. To me Physics is like seeing into the secret blueprints of Creation, and Understanding is a great motivation. I do not like tests and grading, but we will have them in order to prevent the collapse of the fabric of Western Civilization as we know it. Points will be assigned in four major categories as shown in the pie chart to the right. Explanations of each category will be given below. The result will be an allegedly useful measure of something that hopefully correlates with actual learning.

§ 3.1. Homework (10%)

Anticipate homework on a daily basis that could take the form of reading, writing, problem solving, preparing for laboratory activities and maintaining the class binder. While 10% may seem to be a small piece of the pie, success in the course correlates very strongly with performance on daily homework.

§ 3.2. Quizzes (10%)

Quizzes may be announced, but in the even that they are unannounced they will pose little challenge to students who have completed the homework.

§ 3.3. Labs (30%)

Labs take at least 25% of the allotted course time and are a very big part of the class. Data must be recorded in a laboratory notebook, but lab reports will be prepared and submitted electronically. The format will be described in the syllabus. Please note that exams will cover labs and laboratory techniques.

§ 3.4. Exams (50%)

Exams will cover concepts, problem solving and laboratory practices. Because the AP® Exam in may will be 50% multiple choice and 50% extended response, both elements will be covered on our exams.

The final exam grade will be entered in the grade book twice, and the lowest grade will be dropped. This means that either one exam is dropped outright or the final is weighted as an ordinary exam.

§ 4. Text Book

We will be using an on-line textbook: Physics for Scientists and Engineers, Perfection Learning (formerly Kinetic Books). The instructor will provide access details. The full syllabus and the website will detail additional resources.

 

§ 5. Class Binder

It is a class requirement that you have a course binder with section dividers for the different graded elements of the course. Maintaining the binder will be part of your homework.

§ 6. Calculators

Bring either a scientific or a graphing calculator every day!

§ 7. Cell Phones

Cell phones serve no constructive purpose in the classroom. They should be silenced and out of sight – preferably left in your locker.

§ 8. Personal Items

Every day you should bring your book, your binder, your calculator and writing implements. If you bring anything beyond these items they must fit in a bag that is stowed under your workspace or chair on the instruction side of the room. Clutter is a classroom hazard considering the amount of movement that will take place.

§ 9. Food, Drink & Gum

You may have water in a non-spill container which you keep on your workspace on the instruction side of the room. Nothing else is permitted, and even water is not allowed on the lab side of the room or near computers and equipment.

College Board AP Audit Syllabus

show

AP® Physics 1
2014 – 2015 Course Syllabus

Dr. Robert F. Szalapski
The Harley School – Physics

§ 1. Purpose

This Syllabus serves multiple purposes. First, it meets the requirements of the College Board audit for AP® Physics 1. Second, it is helpful for the instructor to prepare the course. Third, it is being provided to the students such that they may understand at the “meta” level the journey on which they are about to embark. The Outline (Section 8), which satisfies the Curricular Requirements of Section 3, is not just a random collection of science bits and pieces. The pieces fit together in a coherent whole in support of not only physics theories but also certain Big Ideas (Section 4) and Science Practices (Section 5) which may are transferable beyond this course. This syllabus supports meta cognition.

§ 2. Introduction

This course, AP® Physics 1, is compatible with the first semester of a college-level algebra-based physics course. Physics 1 and Physics 2 combined replace Physics B while adding additional material beyond Physics B. The requirements for this course are established by the College Board. With regard to mathematics this course requires algebra, geometry and trigonometry, and support for the mathematics is built into the instruction. While calculus appears in a very natural way in physics, calculus will not be utilized in this course. Actually, some concepts from pre-calculus and calculus will be utilized in a very clever way to provide students with additional tools but without the need for first completing those courses.

As opposed to being a survey course that rushes through a broad expanse of material at a superficial level, this course is designed for depth of understanding. To the greatest degree practical this course will be hands-on, interactive and student-centered, and this is reflected in the choice of course materials as reflected in Section 7.

The difference between science versus religion and philosophy is that science is inherently testable through experimentation. This course reserves 25% of the allotted time for experimental inquiry. The laboratory activities discussed in Section 9 are a mixture of open-inquiry and guided-inquiry activities; in particular the students will be provided with tools which they will need to apply in order to answer certain questions; the students will collaborate to develop their own procedures and to analyze, critique and refine those procedures.

§ 3. Curricular Requirements

CR1

Students and teachers have access to college-level resources including college-level textbooks and reference materials in print or electronic format.

CR2a

The course design provides opportunities for students to develop understanding of the foundational principles of kinematics in the context of the big ideas that organize the curriculum framework.

CR2b

The course design provides opportunities for students to develop understanding of the foundational principles of dynamics in the context of the big ideas that organize the curriculum framework.

CR2c

The course design provides opportunities for students to develop understanding of the foundational principles of gravitation and circular motion in the context of the big ideas that organize the curriculum framework.

CR2d

The course design provides opportunities for students to develop understanding of the foundational principles of simple harmonic motion in the context of the big ideas that organize the curriculum framework.

CR2e

The course design provides opportunities for students to develop understanding of the foundational principles of linear momentum in the context of the big ideas that organize the curriculum framework.

CR2f

The course design provides opportunities for students to develop understanding of the foundational principle of energy in the context of the big ideas that organize the curriculum framework.

CR2g

The course design provides opportunities for students to develop understanding of the foundational principles of rotational motion in the context of the big ideas that organize the curriculum framework.

CR2h

The course design provides opportunities for students to develop understanding of the foundational principles of electrostatics in the context of the big ideas that organize the curriculum framework.

CR2i

The course design provides opportunities for students to develop understanding of the foundational principles of electric circuits in the context of the big ideas that organize the curriculum framework.

CR2j

The course design provides opportunities for students to develop understanding of the foundational principles of mechanical waves in the context of the big ideas that organize the curriculum framework.

CR3

Students have opportunities to apply AP Physics 1 learning objectives connecting across enduring
understandings as described in the curriculum framework. These opportunities must occur in addition to those within laboratory investigations.

CR4

The course provides students with opportunities to apply their knowledge of physics principles to real world questions or scenarios (including societal issues or technological innovations) to help them become scientifically literate citizens.

CR5

Students are provided with the opportunity to spend a minimum of 25 percent of instructional time engaging in hands-on laboratory work with an emphasis on inquiry-based investigations.

CR6a

The laboratory work used throughout the course includes investigations that support the foundational AP Physics 1 principles.

CR6b

The laboratory work used throughout the course includes guided-inquiry laboratory investigations
allowing students to apply all seven science practices.

CR7

The course provides opportunities for students to develop their communication skills by recording evidence of their research of literature or scientific investigations through verbal, written, and graphic presentations.

CR8

The course provides opportunities for students to develop written and oral scientific argumentation skills.

§ 4. Big Ideas

These seven “Big Ideas” are enumerated by the College Board and are copied here verbatim. The first six are emphasized in both Physics 1 (this course) and Physics 2, but the last one is more relevant to Physics 2.

Big Idea 1:

Objects and systems have properties such as mass and charge. Systems may have internal structure.

Big Idea 2:

Fields existing in space can be used to explain interactions.

Big Idea 3:

The interactions of an object with other objects can be described by forces.

Big Idea 4:

Interactions between systems can result in changes in those systems.

Big Idea 5:

Changes that occur as a result of interactions are constrained by
conservation laws.

Big Idea 6:

Waves can transfer energy and momentum from one location to
another without the permanent transfer of mass and serve as a mathematical model for the description of other phenomena.

Big Idea 7:

The mathematics of probability can be used to describe the behavior of complex systems and to interpret the behavior of quantum mechanical systems. (Physics 2 only.)

§ 5. Science Practices

These seven “Science Practices” are enumerated by the College Board and are copied here verbatim.

Science Practice 1:

The student can use representations and models to communicate scientific phenomena and solve scientific problems.

Science Practice 2:

The student can use mathematics appropriately.

Science Practice 3:

The student can engage in scientific questioning to extend thinking or to guide investigations within the context of the AP course.

Science Practice 4:

The student can plan and implement data collection strategies in relation to a particular scientific question.

Science Practice 5:

The student can perform data analysis and evaluation of evidence.

Science Practice 6:

The student can work with scientific explanations and theories.

Science Practice 7:

The student is able to connect and relate knowledge across various scales, concepts, and representations in and across domains.

§ 6. Learning Objectives

The Big Ideas of Section 4 and the Science Practices of Section 5 are the very high-level view of the curriculum. At the other end of the spectrum, at the day-to-day working level, the Learning Objectives make it clear what the student must know and be able to do. Figure 1

Figure 1.

An overview of the Curriculum Framework as provided by the College Board.

is taken from “AP PHYSICS 1: ALGEBRA-BASED AND AP PHYSICS 2: ALGEBRA-BASED, Course and Exam Description
Including the Curriculum Framework
, Effective Fall 2014”. While the Big Ideas and the Science Practices combined may be condensed to a single page, the section with the map to Learning Objectives requires 100 pages. It will be summarized only in the Course Outline of Section 8. However, the instructor will be using the full Curriculum Framework when designing lesson plans. Furthermore, it will be made available to the students as it can be utilized as a checklist when reviewing for exams and quizzes.

§ 7. Course Materials

Curricular Requirements 1

The primary course materials are described below. Additional materials will be provided by the instructor on a weekly basis. Each student must have a three-ring binder with dividers to retain handouts, quizzes, etc.

§ 7.1. Textbook

We will by using a college-level textbook, Physics for Scientists and Engineers, Perfection Learning (formerly Kinetic Books). Our version will strictly be the web-based version which has a number of advantages including:

  • Animations and simulation are embedded.

  • “White-board sessions” with audio are included.

  • The on-line version is searchable.

  • Highlighting and margin notes may be added.

The interactive nature of the on-line textbook provides for a more active student-centered experience.
According to the Perfection Learning website, a PDF version of the printed textbook is available with the student license; this may be useful if, at some point, Internet access is unavailable.

§ 7.2. Calculator

A scientific or graphing calculator is required. The usual TI-84 and TI-Nspire calculators are very suitable. Otherwise consult the College Board website at https://apstudent.collegeboard.org/apcourse/. The Physics 1 page is still a bit sparse, but the older Physics B page contains a link to Calculator and Table Policies. Presumably there will be minimal change to the policy, but we will need to check back closer to the Physics 1 AP Exam date of 6 May 2015.

§ 7.3. Web Sites

We will be using interactive simulations from the PhET site developed by the University of Colorado – Boulder. In particular we will use

  • https://phet.colorado.edu/en/simulations/category/physics

  • https://phet.colorado.edu/en/simulations/category/math

The easiest way to find the site is by using Google with the phrase “phet physics” or “phet math”. These simulations may be utilized solely as illustrations or also as idealized “experiments” for guided inquiry.

Become familiar with the College Board website at https://apstudent.collegeboard.org/apcourse/ap-physics-1 and other useful pages. Utilize the resources offered by the College Board.

§ 8. Course Outline

This is the meat of the syllabus. The course units and subunits are broken down with reference to Curricular Requirements, Big Ideas and Science Practices. Learning Objectives may be found in a document provided separately.

§ 8.1. Unit 1: Kinematics

Curricular Requirements 2a
Big Ideas 3
  • Mathematical Preliminaries

  • One-Dimensional Kinematics

  • Scalars, Vectors and Fields

  • Two-Dimensional Kinematics

§ 8.2. Unit 2: Dynamics

Curricular Requirements 2b
Big Ideas 1, 2, 3, 4
  • Forces

  • Newton’s First Law

  • Newton’s Second Law

  • Newton’s Third Law

  • Applications

  • Friction

  • Systems

§ 8.3. Unit 3: Circular Motion & Gravitation

Curricular Requirements 2c
Big Ideas 1, 2, 3, 4
  • Uniform circular motion

  • Dynamics of uniform circular motion

  • Universal Law of Gravitation

§ 8.4. Unit 4: Energy

Curricular Requirements 2f
Big Ideas 3, 4, 5
  • Work

  • Power

  • Kinetic energy

  • Potential energy: gravitational and elastic

  • Conservation of energy

§ 8.5. Unit 5: Momentum

Curricular Requirements 2e
Big Ideas 3, 4, 5
  • Impulse

  • Momentum

  • Conservation of momentum

  • Elastic and inelastic collisions

  • inelastic collisions

§ 8.6. Unit 6. Simple Harmonic Motion

Curricular Requirements 2d
Big Ideas 3, 5
  • Linear restoring forces and simple harmonic motion

  • Simple harmonic motion graphs

  • Simple pendulum

  • Mass-spring systems

  • spring

§ 8.7. Unit 7. Rotational Motion

Curricular Requirements 2g
Big Ideas 3, 5
  • Torque

  • Center of mass

  • Rotational kinematics

  • Rotational dynamics, rotational inertia & moment of inertia

  • Rotational energy

  • Angular momentum

  • Conservation of angular momentum

§ 8.8. Unit 8. Mechanical Waves

Curricular Requirements 2j
Big Ideas 6
  • Traveling waves

  • Wave characteristics

  • Sound

  • Superposition

  • Standing waves on a string

  • Standing sound waves

§ 8.9. Unit 9. Electrostatics

Curricular Requirements 2h
Big Ideas 1, 3, 5
  • Electric charge and conservation of charge

  • Electric force: Coulomb’s Law

§ 8.10. Unit 10. DC Circuits

Curricular Requirements 2i
Big Ideas 1, 5
  • Electric resistance

  • Ohm’s Law

  • DC circuits

  • Series and parallel connections

  • Kirchhoff’s Laws

§ 9. Labs

Students will spend 25% of class time on laboratory activities. (Curricular Requirement 5) Only a very small portion of the laboratory time will be highly structured such that complete instructions are provided; this portion of the lab will focus on how to utilize a particular piece of equipment or how to make a particular measurement which will then be utilized in the other type of laboratory activities. The bulk of the laboratory activities will be Guided Inquiry (GI) with some portion being Open Inquiry (OI).

Students are required to record pertinent lab details and all data in a laboratory notebook. The laboratory notebook is maintained as the true reference for all data. Most labs will require a laboratory report (Curricular Requirement 7) which explains how the laboratory procedure was determined and why the student chose to collect the data that was recorded. The analysis of the data must be fully explained, and conclusions must be supported by sound scientific arguments which refer to established scientific principles. Each report will include a discussion about how the results could be improved through a revision of the laboratory procedures. Lab reports will be submitted electronically, and students must archive all laboratory reports. Instructor comments along with requests for revisions will be electronically added to each draft and returned as such. (Curricular Requirement 8)

§ 9.1. Unit 1: Kinematics

§ 9.1.1. Lab: One-Dimensional Motion

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6, 7

Students will configure carts on tracks with inclines and declines, initially in motion and at rest and with different masses. LoggerPro® software will be utilized to collect data. Students will make graphs, extract parameters and match configuration to graph to form of kinematic equations.

§ 9.1.2. Lab: Free-fall

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6, 7

Students will compare the time for objects of different masses to fall. Different data-collection strategies will be attempted. Students will extract a value for g with a method they devise.

§ 9.1.3. Lab: Galileo’s Ramp & Hit the Target

Inquiry Type Guided Inquiry, Open Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Students will use Galileo’s Ramp to explore the use of height above the floor as a measurement of time to determine initial horizontal velocity. Students will then determine the configuration required to hit a target. Students are scored based upon number of attempts required with a strong emphasis on prediction and verification with error analysis.

§ 9.1.4. Lab: Collision Course

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Students will characterize the motion of two fan cars. Give the starting positions for both and the initial direction of one students must align the second to create a collision. Students will present arguments prior to testing predictions.

§ 9.2. Unit 2: Dynamics

§ 9.2.1. Lab: Force Laws

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Using whatever equipment is available in the lab students will explore the force laws including a Hooke’s Law spring, dipole-dipole interactions of magnets, and PhET simulations will be utilized to generate ideal gravitational attraction data.

§ 9.2.2. Lab: Newton’s Second Law

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Students will collect data on the motion of a track-car to extract the dependence of acceleration on total mass and net force.

§ 9.2.3. Lab: Coefficent of Static Friction

Inquiry Type Guided Inquiry, Open Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Given wood extract the coefficient of static friction for wood on wood.

§ 9.3. Unit 3: Circular Motion & Gravitation

§ 9.3.1. Lab: Place the peg

Perform this lab after conservation of energy.

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Given a simple pendulum of a mass on a string with an initially perpendicular to the vertical, predict the position of a post such that the mass will just perform a loop around the post without losing tension. Explain the prediction and then test it.

§ 9.4. Unit 4: Energy

§ 9.4.1. Lab: Gravitational Equipotentials & Galileo’s Ramp

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

For five different lengths of the ramp support and five different placement positions, measure the landing position of the projectile. Explain the pattern obtained. Collect additional data to support the conclusion.

§ 9.5. Unit 5: Momentum

§ 9.5.1. Lab: Elastic Collisions in One-Dimension

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Use Galileo’s Ramp to give an incoming mass a well-measured velocity. Measure the velocity of target mass by time to ground. Explain in terms of conservation of energy and momentum predictions.

§ 9.5.2. Lab: Elastic Collisions in Two-Dimensions

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Students will modify the previous lab to explore the conservation of momentum in a plane.

§ 9.5.3. Lab: Inelastic Collisions & Kinetic Friction

Inquiry Type Guided Inquiry, Open Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

A sand bag on a string forms a simple pendulum which strikes a wooden block resting on a wooden surface. Extract the coefficient of kinetic friction.

§ 9.6. Unit 6. Simple Harmonic Motion

§ 9.6.1. Lab: Mass on a Spring

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Graph the motion of a mass on a spring for position, velocity and acceleration. Explore dependence on mass and spring constant.

§ 9.6.2. Lab: Simple Pendulum

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Explore the dependence on mass and length. Extract period from data.

§ 9.7. Unit 7. Rotational Motion

§ 9.7.1. Lab: Moment of Inertia

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Given a four-inch length of galvanized pipe, measure the moment of inertia by student-designed method.

§ 9.7.2. Lab: Rotational Kinematics

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Predict the velocity of a hockey puck and/or a steel ball bearing at the bottom of a ramp, and hit the target with projectile motion.

§ 9.8. Unit 8. Mechanical Waves

§ 9.8.1. Lab: Slinky Waves

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Explore wave types, wave properties, interference and reflection.

§ 9.8.2. Lab: Standing Waves

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Determine the conditions for standing waves on a string.

§ 9.9. Unit 9. Electrostatics

Hands-on exploration of electrostatics will be conducted via simulations.

§ 9.10. Unit 10. DC Circuits

§ 9.10.1. Lab: V-I Curves

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Find the behavior of Ohmic and non-Ohmic devices and extract the power law for the device.

§ 9.10.2. Lab: Series and Parallel DC Circuits

Inquiry Type Guided Inquiry
Curricular Requirements 6a, 6b
Lab Practices 1, 2, 3, 4, 5, 6

Determine Kirchoff’s Laws from observations. Find the rules for resistances combined in series and in parallel.

§ 10. Additional Activities

(Curricular Requirements 3 and 4) Students will choose and engage in two activites which apply the principles of the course to problems beyond what is covered in the laboratory portion and with applications beyond the classroom. We will discuss possible choices as we go through the year. Additionally our school is blessed with some pretty unique facilities which provide a range of opportunities.

Call Me Dr Rob logo